One of the most important
innovations that have come with
Android 4.1.1 Jelly Bean is the ability to use the
offline voice typing, until Ice Cream Sandwich instead everything could happen only if connected to the internet.
Remember that you can use the voice typing in all cases where we have the keyboard open … there just a tap on the
microphone button.
Therefore, it is very simple to use the voice typing but for offline use you have to
download the package in our language, here's how on Jelly Bean:
- Open the system settings of the device.
- Go to language and placing.
- Make a tap on voice search.
- Now do a tap on Download ricon. VOC. offline.
- With a swype moved All tab and select Italian (Italy), will begin the download of the packageof 15 MB.
- Eventually the card INSTALLED will look like this:
Now for example go to write an sms and open the keyboard, then tap on the microphone and begin to dictate the text. Of course to verify correct functioning offline just disconnect the wifi and mobile connection.
Finally, we must point out that not all keyboards will invoke Google voice dialing, operation is obviously insured with the default Android keyboard.
source :
activate offline voice typing on jelly bean
Are you getting rid of your android battery life? here you can find some usefull to make your android battery live more longer. Among the main problems faced by users of smartphones is battery life levels, more sophisticated specifications of a smartphone, more and more resources are needed. Honestly, how much time does your smartphone battery able to survive before recharge? How many of my fellow readers that carry the charging cable into the Office? If your are in the stage where cannot far with the charge, it's a sign that your
smartphone battery problems are serious. For users of Android smartphones, below my kongsikan Tips and how to save money using the default Android Battery systems available on a device that only requires a slight touch.
How To Save Battery Android Smartphone
Below you can read my explnation how to increase battery life of your android phone or android device
- Turn off Wi-Fi, Bluetooth & GPS
Use of Wi-Fi, Bluetooth and GPS are among the most widely used functions battery resource. Make sure you only turn on this functionality when needed only.
- Charging cable
Many consider the use of charging cables can be used as you wish, as long as the battery may charge roughly OK. Make a note that any charging cable that was included with the specification that allows especially has the level of flow of electrical currents and the pin. Make it a habit to use the charging cable that was released exclusively for a smartphone to avoid ill effects in the long term.
In addition it can save battery usage, awareness is also important to protect your gadgets from the results of your investment.
- Power Saving function
This functionality can be accessed through the notification Bar or (Setting-> Power Saving). You can specify the desired mode or allow by default.
- limit the Background Process
By default the Background Process Limit is set to the Standard limit. You can setkannya to No background processes. (Settings-> options-> developers ' Apps).
Limit Background Processes
Note: these Settings can cause your smartphone's less responsive.
- Window, Transition Animation & Animation Duration Scale
Set the Windows Animation, Transition and Animation Duration scale OFF or setkan to scale. (Settings-> options-> developers ' Drawing).
Animation Window Scale
Note: Touchwiz will be more responsive and assessment battery discharging more slowly.
- Data Usage
To use the data package from telco, you can setkan Mobile data OFF. Only turn ON when needed only. (Settings-> Data usage)
Note: by default, usage Data does not use a lot of battery resource unless you are out of coverage area.
- Sync
Set the Sync function OFF, if you're using different types of email accounts (Gmail, Dropbox, Samsung Account and so on) or you can restrict the type of Sync as needed only. This Setting must be set one by one. In addition to reducing the use of the battery, it can save the use of Your data package. (Settings-> Accounts & Sync).
- Disable Bloatware
Stock firmware released by Samsung brought in once with some bloatware, Flipboard, Yahoo Finance and Yahoo News (Galaxy S3). Each of which will operate in the background and using the batteries and resource data. To disable (Settings-> Applications Manager-> All-> click each application-> Disable bloatware).
Note: the default applications are Bloatware imported in the file system by the manufacturer and are typically not used directly. In most custom ROMs, bloatware has been released by the developer.
- Screen Brightness and timeout
Set Screen Brightness to the Automatic and Screen timeout is lower (according to the comfort of your eyes). (Settings-> Display-> Screen).
Sound and Vibration
For Sound and Vibration settings, disable it all once of Keynotes, Touch Sounds, sounds, Screen lock and Auto Haptic feedback Haptic. (Settings-> Sound-> System).
Aside from that I mentioned above, there are still a few more tips how to
improve battery life for android smartphone which is by not using Live Wallpapers and get a spare battery.
Source :
how to increase android battey life
Here we will see how to install a modified recovery on Galaxy S3.
For the purpose we will use the
ClockWorkMod Recovery 6, the latest available and one of the most advanced in existence (for further information see
WARNINGS
- Read the Guide and then follow it point by point as it is and without doing anything .
- These guidelines will void warranty officially.
- You can no longer perform updates via OTA or KIES.
- As with all operations of modding, the liability for damages is only of those who decide to change their phone.
PREREQUISITES
- To install the recovery changed use Odin (the version you choose is indifferent) DOWNLOAD
- Make sure they are installed in the Pc phone drivers (just the presence of Kies)
- Download the recovery package for Galaxy S3 from recovery-cwm-touch-6.0.2.7-i9300.tar
How to Install Clockworkmod recovery on Galaxy S3
- Run Odin and PDA field choose the recovery package previously downloaded .tar.
Make sure the Auto Reboot entries and f. Reset Time are active (the graphics might change depending on the version used odin).
- Put Download Mode your phone.
By phone off press the buttons VOLUME down + HOME + POWER until you see the following screen appears.
- Confirm by pressing the VOLUME UP button.
- Now you can connect your device to your pc via usb cable.
Wait that odin recognize the phone.
- Start the installation process by clicking on the Start button of Odin.
The operation will last a few minutes and after the Galaxy will restart by itself.
- Congratulations, you have installed the ClockWorkMod Recovery.
To enter, phone off press the buttons VOLUME UP + HOME + POWER.
There you will see a screen similar to the following:
The quickest method to uninstall the recovery is to flash with odin the firmware in use (data will not be erased).
Although the
Samsung Galaxy Camera isn't just like a smartphone, you can also obtain
root permissions because the onboard operating system is
Android. As with all other terminals of the toy robot green, root permissions may change the user experience, but at the same time, might void the warranty Samsung (although the process to restore the original software
is supposed to return the device under warranty.
In fact, already on
XDA some users (including such
AdamOutler) have managed to obtain root permissions thanks to
CF-Root user found
ChainFire, who created a version for the
Galaxy Camera.
However, enter the root permissions can potentially cause damage to the device as it could go in
brick (i.e. do not turn back on anymore):
TechnologyAndroid.com assumes no responsibility for damage to objects or people as a result of using the Guide.
Compatibility: the following guide is only compaibile with Samsung Galaxy Camera; It is highly sonsigliato to try it on any other device other than the latter.
That said, let's get started!
- First of all, we need to download the drivers for the camera, which will be installed on your computer. Is it possible to get these drivers installing Samsung Kies at this link: Download KiesAlternatively, you can take the drivers directly from these links: Windows 32 bit (x 86) | Driver Windows 64 bit (x 64);
- Download the CF-Root from the following link: Download CF-Root | File name: CF-Auto-Root-gd1-ekgc100.zip
- Now extract the file you just downloaded in step 2 on the computer, obtain the necessary files from Flash to have root permissions; the file should be named CF-Auto-Root-gd1-ekgc100.tar.md5 (the important thing is that the file ends with the .tar extension or md5 so as to be compatible with Odin);
- Download Odin, the Samsung software that will allow us to Flash the file retrieved previously: Download Odin3 v 3.04;
- Now extract the file you just downloaded into the directory that you prefer (the desktop) so you can start;
- Turn off the Galaxy camera. Then now, press and hold down the button Volume Down + Camera + Power button together until the screen does not light up in Download mode. If you get a screen Warning!, press the Volume up button to access the Download mode;
- Run v3.04.exe Odin3 obtained in step 4;
- Connect Samsung Camera to PC; You should now get a message saying "Added!!" on Odin, on a box in the lower left-hand corner.
If you don't get this message, make sure you have installed the drivers correctly (in paragraph 2), or try to change the USB port that you connected Samsung Galaxy Camera.
- Click on PDA in Odin, and go and select the CF-Auto-Root-gd1-ekgc100.tar.md5 file that you extracted in step 3 above;
- Don't make no other changes on Odin, make sure the box for "Re-Partition" is not flaggata;
- Now, click on the Start button of Odin to start flashing the file CF-Root that you selected on the PDA; wait a moment, and if everything is gone, will get written correctly Pass with green background.
If you get a message saying Fail and red background, unplug the Galaxy Camera from your PC, remove the battery for 4-5 seconds, insert it again and try again from step 7;
- Turn on Samsung Galaxy the camera and you will have root permissions.
For any further information or question, you can directly read the
thread on XDA .